用于频率合成器的低损耗声表面波滤波器

简述了产生声表面波滤波器插入损耗的主要机理和获得低损耗的原则；介绍了根据此原则对１００～５００ＭＨｚ５种滤波器的研制过程和结果。实验表明，采用镜像阻抗连接换能器结构可达到３～４ｄＢ的低损耗，并成功地应用于频率合成器中。     

条形荷载下饱和均质地基曼德尔效应研究

本文通过研究biot固结理论,探讨了曼德尔效应产生的原因,并利用大型非线性有限元软件adina进行数值分析,得出条形荷载下饱和均质地基固结的数值解。并通过计算分析,得出了影响曼德尔效应的因素。     

精密铜带圆盘纵剪机

通过对精密铜带圆盘剪切机的工作原理和工艺过程进行研究，对引进的美国剪切机进行了技术改造，设计制作了新的装置，实现了软态铜带的剪切。     

基于遗传算法的工作辊温度场参数优化模型

针对热连轧机工作辊热辊形计算中温度场模型的热交换等参数难以确定的问题 ,建立了基于遗传算法的参数优化模型 ,可以解决复杂条件下的热参数的求解问题。利用优化参数计算的轧辊温度场与实际测量结果一致。     

过程控制级模拟轧钢系统的研制及在热轧试车中的应用

宝钢集团上海第一钢铁有限公司(后面简称一钢)新建的不锈钢工程1780热轧项目中,为了能在较短周期内完成所有的应用软件开发与测试任务,特别研制了模拟轧钢功能。本论文主要阐述利用计算机的集成思想,结合热轧工艺,来开发模拟轧钢功能,以及利用模拟轧钢进行现场各种情况的模拟测试。     

A disposable single-use electrochemical sensor for the detection of uric acid in human whole blood

We report here a non-enzymatic detecting electrode strip for fast monitoring of uric acid in human whole blood. A single-use amperometric uric acid sensor strip, incorporating a three-electrode configuration, has been fabricated on a polypropylene substrate using low cost screen-printing (thick-film) technology. Both the working and counter electrodes were prepared by screen-printing commercial carbon ink. The integration on the same support of pseudo-reference electrode was obtained by screen-printing a commercial silver ink and subsequent electrochemical pretreatment. Simply by placing a 20 μl human whole blood drop on the strip is enough for uric acid analysis by square-wave voltammetry. Real human whole blood samples were analyzed by this method and compared to the phosphotungstic acid clinical test procedure with satisfactory results.     

气体传感器的集成化研究状况

集成技术在未来传感器的发展中起重要作用。综述了与集成工艺兼容的气体传感器的研究状况,包括半导体场效应型、晶体管型、薄膜型、微量热计型和声表面波(SAW)型气体传感器。     

Saw and digital technologies in mutlicarrier demodulators

One key technology, for the implementation of future on-board processing payloads, is the multicarrier demodulator (MCD). The MCD is instrumental in allowing FDMA/TDM access schemes which optimize the use of on-board and ground resources in VSAT networks. This paper deals with the analogue and digital implementations of MCD, trying to assess the fields of application of each of the two technologies.     

多层住宅砖混房屋设计中两点问题的探讨

浅议多层住宅砖混房屋中构造柱的作用及设置方法；探讨了砖混结构墙下条形基础底面积重复利用问题及其解决方法。     

浅谈胶条接头与模具设计

简要地介绍了橡胶条常见接头工艺方法、应用特点及模具结构与设计方法。